Bulkhead Sealing Systems


Wherever metallic pipes and or cables have to be sealed RISE/NOFIRNO offer the ultimate solution - the ultimate in fire ratings, the shortest installation times and maintenance friendly. Even combined penetrations for metal and plastic pipes as well as cables can be sealed effectively. One system for all types of penetrations! This multi-all-mix system is approved for any combination of cable, metallic, GRP or plastic pipes and has a service life of over 20 years. Needless to say that the NOFIRNO system offers the best Total Cost of Ownership on the market of sealing systems.



RISE is the fire resistant sealing system of choice for cable and pipe penetrations. Fast and simple to install with its smart system design and extremely limited number of component parts. Future enlargements can be effortlessly completed with RISE. It's not for nothing that many shipyards world-wide call RISE the RAPID TRANSIT SYSTEM.



The most simple and effective RISE/ULTRA technology makes the CRUSHER system applicable for all plastic pipe penetrations. The RISE/ULTRA C-fit crushers squeeze down and seal opening during a fire. For oversized conduit sleeves RISE/ULTRA wraps are available. During fire exposure the RISE/ULTRA compound forms an adhesive mass.



The SLIPSIL sealing plug is the ideal solution for the fire safe and gas and water tight sealing of transits carrying single or multiple plastic or metal pipes. Compared with other sealing plugs, installing the SLIPSIL plug is extremely simple. The plugs can be installed in minutes and do not require any bolting or other mechanical outfitting. The plugs can already be exposed to high pressures immediately after installation.



The DYNATITE sealing plugs were developed for applications where a high degree of (instantaneous) tightness is required. The DYNATITE plugs are compressible;the high-tech design of DYNATITE actually allows the system to get tighter as the pressure increases.



The ULEPSI tank support is designed for application on board sea-going carriers for the transport of products which, for reasons of viscosity, have to be maintained at a high temperature (asphalt, coal tar, creosote, etc.).


Contact Us

MAIN OFFICE +64 9 309 6317


About Us

Our History


In The Media


GMS Store

90 Gaunt Street
Auckland 1010
New Zealand
+64 9 309 0048

& Fabrication

65 Gaunt Street
Auckland 1010
New Zealand

General Marine Services Auckland

© General Marine, 2012. Website designed by Studio Q